Scissors Trap In A Deep Tunnel The scissors or Out-Of-Sight trap allows you to dig into an active tunnel to place the trap exactly in the moles path.
1) With a tool about the same length and width as the trap, dig down and expose the tunnel. The tunnel must be open on both ends of the trap. (A through tunnel!) 2) Place a wedge of compacted dirt in the center of the tunnel, making a speed-bump of sorts. It should cross the tunnel and will lie directly beneath the trigger pan. Or use clip-on tunnel choke. 3) Read the box instructions for cocking and setting this trap! The tools provided are to gain leverage. They are placed on the spring with the trigger or long rod laying across the top of the trap. The rod extends through one setting lever and will eventually latch inside the pan lip. Use the safety hook once the trap is cocked. The trap should align with the tunnel so the mole will have to pass between one set of jaws before hitting the blockage or speed-bump. Once the trap is in position, back fill the entire opening with loose soil to keep daylight from entering the tunnel.
Moles can drive you nuts-Guide

Let Hector's make your shopping easier this year, we will get your order to you or whomever you want quickly ,our warehouses are located throughout the U.S. so orders arrive fast!
Rinnai,Toyostove,Comfortzone and Toro are warranted through an extensive network of Servicing Dealers-we recommend you check for a service dealer in your area before making your online purchase- in the event you may have a warranty issue. Once the unit is installed and if you do have a warranty issue it must be repaired by a servicing contractor in your area. Although this rarely happens we do want to make you aware of our policy. If you want us to repair you will be responsible for shipping both ways to and from our location. This policy is standard with most heating suppliers.