Can they be installed at any height? All models can be installed at the height of your choice. Typical ironing board height is 34"-36" from the floor.
Are they difficult to install? The product is very easy to install. It basically requires identifying the desired location, cutting and removing the drywall, slipping the unit between the studs and attaching it with the installation screws provided. All units are preassembled and ready to install.
Are the electrical models hard to wire? Electrical models are prewired so they only need to be pigtailed with the incoming electrical wire. The pigtails are loacted at the bottom of the electrical raceway. All electrical work must be done in accordance with all applicable electrical codes. Electrical models utilize 15 AMP.
If we don't order the swivel now, can we get it later? The swivel is not a retrofit item. Since it utilizes more interior space due to its rugged undercarriage, the frame on a swivel cabinet is deeper than cabinets without swivels. For this reason, swivels must be ordered at the time of purchase and cannot be added later. Where applicable, all other options available on the ironing centers can be added after the original purchase.
How do we get replacement cover and pads? Ironing Board Cover and Pad is standard feature on all units. Replacement cover and pads can be obtained directly from HectorsHardware.com by phone, 1-866-275-7383.
Do the doors come prefinished? All wood doors come unfinished so you can customize your unit to match the room decor. Interior has been painted a cool gray saving you hours of unnecessary finishing time. (NE-242 with white flat door comes standard with white interior and exterior color.)
What are the door dimensions? The door dimensions for all models (except Model A-46) are 15" W x 47 7/8" L. The Model A-46 is 15" W x 60 5/8" L.
What are the rough-in opening dimensions? Rough-in openings for all models except the A-46 are 14 1/4" W x 47 1/8" L x 3 7/8" D. The Model A-46 is 14 1/4" W x 59 7/8" L x 3 7/8" D.
Can the door be hinged on the left side? Yes, all units may be ordered with a left-hand hinge at no additional charge. All units come standard with a right-hand hinge. (As you face the unit the hinge is on the right-hand side of the cabinet.)
Will it hold all irons? The hot iron storage area is designed to hold the majority of all major brands of irons with the exception of very large, specialty irons designed for the sewing industry.
Let Hector's make your shopping easier this year, we will get your order to you or whomever you want quickly ,our warehouses are located throughout the U.S. so orders arrive fast!
Rinnai,Toyostove,Comfortzone and Toro are warranted through an extensive network of Servicing Dealers-we recommend you check for a service dealer in your area before making your online purchase- in the event you may have a warranty issue. Once the unit is installed and if you do have a warranty issue it must be repaired by a servicing contractor in your area. Although this rarely happens we do want to make you aware of our policy. If you want us to repair you will be responsible for shipping both ways to and from our location. This policy is standard with most heating suppliers.
